How do I hard reset my Trimlight Select Plus control box?
Learn how to perform a hard reset on your Trimlight Select Plus control box with our guide. Get your lighting system back on track with confidence.
Select Plus System- Press and hold the minus button (-) until the unit flashes a quick red and then unplug the system.
One of the easiest ways to determine whether you have an Edge controller or a Select controller is to look at the top left corner of the controller itself. This quick visual check can help you identify your system before moving forward with troubleshooting, setup instructions, or reset steps.
If you see three indicator lights in the top left corner of the controller, you have an Edge controller. Those lights are a key identifying feature and offer one of the fastest ways to confirm that your system is part of the Edge line. Because the controller appearance differs slightly between models, this detail can help you verify the correct unit without needing extra tools, serial numbers, or additional product information.
If you do not see those three lights in the top left corner, then you have a Select controller. In other words, the absence of those lights indicates that your system uses the Select controller design rather than the Edge controller design. This distinction matters because certain features, troubleshooting paths, and support instructions may vary depending on which controller is installed on your system.
Before continuing with any reset or support process, take a moment to inspect the controller carefully and confirm which version you have. Starting with the correct controller type can reduce confusion and help ensure you are following the right instructions for your specific setup. It can also save time if you are working through support documentation or speaking with a technician.
As a simple reminder, three lights in the top left corner means you have an Edge controller. If those lights are not present, then you have a Select controller. This small visual difference is the quickest and most reliable way to tell the two controller types apart.